• Save Job
  • 5 - 8 Years
  • Posted : above 1 month

Job Description:

JOB DESCRIPTION

DUTIES & RESPONSIBILITIES
Independently perform all responsibilities expected of Consultant Production Engineer Provide technical leadership role for production analysis, and optimize production under surface and reservoir constraints
Select ideal IPR based on well productivity Determine operating point and changes to completion needed over the life of well
Identify inflow performance problems and recommend mitigation procedure Quantify formation damage and its impact on performance
Define model inputs necessary for reservoir simulation such as VLP curve, surface or bottomhole pressure constraints
Perform nodal analysis, tubing lift calculations, tubing lift evaluation
Design, analyse and optimize artificial lift systems including but not limited to gas lift, ESP, rod lift, jet pump etc Specify equipment and field services required for installation, operation and maintenance of recommended design
Identify production issues caused by near wellbore issues eg skin or permeability degradation, sand production, wellbore issues eg liquid loading, hydrates, paraffin, asphaltenes and recommend solutions to assure optimal flow
Build black oil, extended black oil, compositional, EOR and thermal models for well and surface network
Perform routine QA/QC on all production and completion data relevant to building production models
Independently perform material balance (MB), pressure transient analysis (PTA) and rate transient analysis (RTA) studies to define
Near wellbore damage or skin Flow boundaries as observed in buildup or drawdown data
Determine reservoir size, drive mechanism and explain observed pressure depletion
Provide reservoir PI decline forecast and EUR with uncertainties
Evaluate surface production facilities impact on short-term, mid-term and long-term field performance by
Building surface network models incorporating wells, pipelines, pumps, separators and delivery nodes
Define forecast scenarios incorporating reservoir deliverability constraints, flow capacity, processing capacity and economic constraints
Create risk and economic analysis with minimal supervision, prepare recommendations
Perform surface network optimization under production constraints, delivery requirements, lift gas availability, injection water availability or produced liquid handling
Identify bottlenecks and flow issues impacting performance
Understand DOF concepts and apply with minimal supervision to
Configure and trouble shoot a SCADA system incorporating RTUs, gauges
Understand configuration requirements and communication protocols necessary to acquire data from field
Understand data flow between SCADA and production optimization platform to monitor real time production operations
Perform flow assurance studies with minimal supervision
Perform risk and economic analysis, with minimal supervision
Support multiple disciplinary team to build simulation models to predict reservoir performance incorporate complex geology, reservoir characteristics, multiple wells configurations, and surface facilities integration
Perform qualitative interpretation of petrophysical inputs and reservoir properties
Identify all reservoir, production and completion issues and recommend solutions Characterize complex reservoir fluids behaviour in order to forecast production
Apply understanding of reservoir, wellbore and surface network flow to identify and mitigate near wellbore issues, lift inefficiencies, flow modelling in order to determine fluid flow, phase behaviour and physical properties of the reservoir
Evaluate output from reservoir simulation for history match, conformance of forecast constraint to field conditions
Perform reliability and failure analysis of well and surface network to establish root cause analysis of failure and suggest mitigation techniques for future operations
Define Field Services Management protocols to create, modify, monitor, close activities Review post jobs reports
Perform QA/QC on all results provided to clients and provide technical guidance and oversight to junior professionals or technicians
Work independently without general supervision or participate in project teams and, on occasion, act as the lead on small projects
Make decisions within established guidelines, seeking advice of senior team members on new or unfamiliar challenges or situations falling outside of normal procedures
Work independently or as part of a team on assigned projects as instructed, complying with verbal and written instructions and procedures
Meet regularly with clients for pre-sales and pre-job consulting and to present Weatherford answer products May be accompanied by junior staff or sales staff
Produce Weatherford standard answer products on a variety of datasets from basic to highly complex Integrate results with other technical domains
Identify and recommend solutions to technical problems Make decisions based on industry standards and past experience, in compliance with Weatherford policy, seeking advice on challenges falling outside of normal procedures
Participate in training and development through classroom courses, eLearning, and on-the-job projects with senior team members
Maintain membership of relevant professional societies Deliver presentations to local technical societies and remain current on industry regulations and developments
Complete all mandatory training as assigned, including the required HSE training, in compliance with corporate and business unit guidelines Maintain an acceptable HSE record
Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions
Must understand and comply with all safety rules and company policies of Weatherford
Demonstrate awareness of Weatherford corporate business plans and contribute to local technology strategy
Work assignments carried out to the highest quality level
Perform various other duties and activities as assigned by supervisor within the physical constraints of the job

Essential

Computer Literacy in MS Windows plus basic desktop application
Advanced functional knowledge of all Weatherford standard software programs required for the specific technical domains
Able to work independent with remote and infrequent supervision
Able to provide oversight to small teams of professional and technical members
Proficiency in industry leading Production Engineering Software

Preferred

Lead team to deliver objectives and operational guidelines for a cross domains solution
Assisting with Project management for defining activities, determining resources and monitoring project timeline for a successful delivery of multi-disciplinary solution as specified in statement of work or scope
Experience evaluating performance of wells under natural flow and artificial lift
Experience with industry standard softwares such as iDO, Wellflo, PanSystem, ReO , , Gas lift design, ESP design, Rod Pump design
Advanced functional knowledge of all Weatherford standard software programs required for the specific technical domains

QUALIFICATIONS

Qualification

Bachelor/Masters degree in Petroleum Engineering/ relevant engineering from a recognized university
Minimum 10 functional experience post MS/PHD Add 5 years with BS only

Profile Summary:

Employment Type : Full Time
Eligibility : Any Graduate
Industry : Petroleum/Oil and Gas/Power, Projects/Infrastructure/Power/Energy
Functional Area : Production/Manufacturing/Maintenance/Packaging
Role : Production/Manufacturi ng/Maintenance
Salary : Not Mentioned
Deadline : 19th Nov 2019

Key Skills:

Company Profile:

Company:

These free online tutorials may interest you

People who search this job also searched for the following Keywords

All rights reserved © 2018 Wisdom IT Services India Pvt. Ltd DMCA.com Protection Status