Understanding the Unified Report View Results Window - WinRunner

If you are new to WinRunner, or you are integrating WinRunner and QuickTest tests, it is recommended to use the Unified Report view. For information on analyzing the results of a called QuickTest test, see “Integrating with QuickTest Professional.”

To view the unified report, choose Tools > General Options. In the Run category, confirm that Unified report view is selected.

Note:You can display the unified report view for a test only if either the Unified report view or the Generate unified report information option was selected when you ran the test. If you ran a test with WinRunner report view selected and Generate unified report information cleared, then you cannot view the unified report for that test run.

To open the Test Results window, choose Tools > Test Results or click the Test Results button. The WinRunner Test Results window opens in the unified report view.

Understanding the Unified Report View Results Window
Test Name and Results Location

The Unified Report View titlebar displays the name of the test and the test results folder.

Menu Bar and Toolbar

The menu bar contains the options that you can use to analyze the test results. Several of these options can also be performed using the corresponding Test Results toolbar button, as indicated below.

  • File menu—Contains options for opening and printing test results, and exiting the Test Results window.
  • Open—Opens the Open Test Results dialog box, which enables you to select a test and open the most recent results for that test.
  • Print—Opens the Print dialog box, which enables you to print the selected display or the entire test results.
  • Print Setup—Opens the Print Setup dialog box, which enables you to select printer options.
  • Recent Files—Displays the four most recent files that were opened in the Test Results window.
  • Exit—Closes the Test Results window.
  • View—Contains options for viewing test results window components and analyzing specific elements of the test results
  • Test Results Toolbar—Displays or hides the test results toolbar.
  • Status Bar—Displays or hides the test results status bar.
  • Filters—Opens the Filters dialog box, which enables you to choose which types of test steps you want to view.
  • Expand All—Expands all step nodes in the test tree.
  • Collapse All—Collapses all step nodes in the test tree.
  • Tools—Contains options for connecting to and adding defects to TestDirector and for navigating the test to find steps with a specified result status.
  • Add Defect—If the Test Results window is already connected to TestDirector, selecting this option opens the TestDirector Add Defect dialog box, which enables you to add a defect to the TestDirector project.
  • If you are not yet connected, choosing this option opens the TestDirector Connection dialog box. After you connect to TestDirector, the TestDirector Add Defect dialog box opens.

  • TestDirector Connection—Opens the TestDirector Connection dialog box, which enables you to connect the Test Results window to a TestDirector project.
  • Find—Opens the Find dialog box, which enables you to navigate up or down through your test to find result steps with the selected status.
  • Help—Contains options for accessing additional information about the Test Results window.
  • Contents and Index—Opens the Test Results Help file.
  • Support Information—Opens the Mercury Interactive Customer Support Help file.
  • About Test Results—Opens a window with summary information about the Test Results application.

Results Tree

The Results tree shows a hierarchical view of all events performed during the test run. Selecting an event in the results tree displays additional details of the event in the Event Summary pane. You can expand and collapse the tree or individual nodes in the tree. You can also use the Filter and Find options for easier navigation.

Test Summary

Contains overview information about the test run including the run start time, run end time, total test run time, user name, and a summary of checkpoint results.

NoteUnlike the WinRunner report view, the Unified report view counts single-property checks in the GUI checkpoint summary. Therefore, the total number of GUI checkpoints in the Unified report view may differ from the number displayed in the WinRunner report view.

Event Summary

Contains summary information about the event that is currently selected in the results tree, including the event type, status, line number, event time, and a basic description of what was checked.

For checkpoints (including single-property checks), the Event Summary also includes a link to the event details. For example, if you click the Show Event Details link for a bitmap checkpoint, then the expected, actual, and difference images open. If you click the link for a GUI Checkpoint, the GUI Checkpoint Results window opens.

Note:To view checkpoint details, WinRunner must be installed on the Test Results computer.

Finding Results Steps

The Find dialog box enables you to find specified steps such as errors or warnings from within the Test Results. You can select a combination of statuses to find, for example, steps that are Passed and Done.

Finding Results Steps

The following options are available:

following options are available

Filtering Test Results

The Filters dialog box enables you to filter which results are displayed in the test results tree, according to their status.

Filtering Test Results

NoteThe Iterations and Content options are only available from QuickTest

The following options are available:

Filtering Test Results

All rights reserved © 2018 Wisdom IT Services India Pvt. Ltd DMCA.com Protection Status

WinRunner Topics