WORK MEASUREMENT - Production and Operations Management

Work measurement is also called by the name ‘time study’. Work measurement is absolutely essential for both the planning and control of operations. Without measurement data, we cannot determine the capacity of facilities or it is not possible to quote delivery dates or costs. We are not in a position to determine the rate of production and also labor utilization and efficiency. It may not be possible to introduce incentive schemes and standard costs for budget control.

Objectives of Work Measurement
The use of work measurement as a basis for incentives is only a small part of its total application. The objectives of work measurement are to provide a sound basis for:

  1. Comparing alternative methods.
  2. Assessing the correct initial manning (manpower requirement planning).
  3. Planning and control.
  4. Realistic costing.
  5. Financial incentive schemes.
  6. Delivery date of goods.
  7. Cost reduction and cost control.
  8. Identifying substandard workers.
  9. Training new employees.

Techniques of Work measurement in Production Management

For the purpose of work measurement, work can be regarded as:

  1. Repetitive work: The type of work in which the main operation or group of operations repeat continuously during the time spent at the job. These apply to work cycles of extremely short duration.
  2. Non-repetitive work: It includes some type of maintenance and construction work, where the work cycle itself is hardly ever repeated identically.

Various techniques of work measurement are:

  1. Time study (stop watch technique),
  2. Synthesis,
  3. Work sampling,
  4. Predetermined motion and time study,
  5. Analytical estimating.

Time study and work sampling involve direct observation and the remaining are data based and analytical in nature.

  1. Time study: A work measurement technique for recording the times and rates of working for the elements of a specified job carried out under specified conditions and for analyzing the data so as to determine the time necessary for carrying out the job at the defined level of performance. In other words measuring the time through stop watch is called time study.
  2. Synthetic data:
    A work measurement technique for building up the time for a job or pans of the job at a defined level of performance by totaling element times obtained previously from time studies on other jobs containing the elements concerned or from synthetic data.
  3. Work sampling:
    A technique in which a large number of observations are made over a period of time of one or group of machines, processes or workers. Each observation records what is happening at that instant and the percentage of observations recorded for a particular activity, or delay, is a measure of the percentage of time during which that activities delay occurs.
  4. Predetermined motion time study (PMTS):
    A work measurement technique whereby times established for basic human motions (classified according to the nature of the motion and conditions under which it is made) are used to build up the time for a job at the defined level of performance. The most commonly used PMTS is known as Methods Time Measurement (MTM).
  5. Analytical estimating:
    A work measurement technique, being a development of estimating, whereby the time required to carry out elements of a job at a defined level of performance is estimated partly from knowledge and practical experience of the elements concerned and partly from synthetic data. The work measurement techniques and their applications are shown in the following table.

Work Measurement techniques in Operations Management

Work measurement techniques and their application

Work measurement techniques and their application


All rights reserved © 2018 Wisdom IT Services India Pvt. Ltd DMCA.com Protection Status

Production and Operations Management Topics