Finding another job can be so cumbersome that it can turn into a job itself. Prepare well for the job interviews to get your dream job. Here's our recommendation on the important things to You need to prepare for the job interview to achieve your career goals in an easy way. Pptp is known as Point to Point Tunneling Protocol used to implement virtual networks with many known security issues. It allows corporations to extend their own corporate network through private "tunnels" over the public Internet. The PPP payload is encrypted using Microsoft's Point-to-PointEncryption protocol (MPPE). Strong determination is required to crack the job. Follow our Wisdomjobs page for Pptp job interview questions and answers page to get through your job interview successfully in first attempt.
PPTP is the abbreviation for Point-to-Point Tunneling Protocol. It is a protocol or a set of communication rules used for implementing on-demand Virtual Public Networks (VPNs) over the Internet or any other public TCP/IP based network.
PPTP operates at Layer 2 of the OSI model, also called the data-link layer.
PPTP is an extension of PPP and uses its negotiation, authentication, and encryption processes.
PPTP encapsulates IP, IPX, or NETBEUI packets into the PPP frame to create a tunnel for secure communication. This tunnel, also called a session, is used for sending private data across WAN or LAN networks, so this information is secure and not visible to unauthorized users.
It can be particularly helpful to send data over unsecure networks.
PPTP was first introduced to the world in 1995 by a consortium led by Microsoft, 3Com, and others.
It was the first VPN protocol that was supported by the Windows dial-up, and every Microsoft operating support released after 1995 supports it. Other operating systems such as Linux and OS X supported this protocol through native applications.
Today, almost every mobile and desktop platform supports PPTP.
PPTP is popular due to the following reasons:
Tunneling is the process of sending packets through a private network by routing them over a different network such as the Internet. This ensures that other network routers can’t access the computers that are connected to the private network.
Three computers are used in any PPTP deployment, and they are a PPTP client, a PPTP server, and a network access server. In some implementations, a PPTP Network Server (PNS) and a PPTP Access Concentrator (PAC) are also used.
A PPTP client is a computer that encapsulates PPP packets into IP datagrams to transmit them over the Internet to the PPTP server.
A network access server is a server that provides Internet access to connected computers. It is designed to handle huge numbers of dial-in clients, so it can help multiple computers to connect to the Internet.
In PPTP, network access servers provide PPP service to support PPTP-enabled clients.
A PPTP client and a PPTP server use tunneling to route packets through a private network. However, both these computers ensure that they use only those routers that know the address of the private network’s intermediary server, to ensure the packets are secure.
A PPTP client sends a packet through the established tunnel to the PPTP server. In turn, this server gets the destination address and sends it across a private network to the destination computer.
You don’t need a network access server when you’re using a PPTP client that’s already connected to the LAN, provided the PPTP server is also connected to the same LAN.
Otherwise, you need a network access server to create a PPTP tunnel.
A PPTP client can connect to the PPTP server in two ways:
PPTP supports two types of tunneling:
Voluntary tunneling doesn’t require any support from ISPs or other network devices such as bridges because it is initiated by the client.
Compulsory tunneling, on the other hand, should be supported by routers or network access servers because it is initiated by a PPTP server.
In most cases, yes. The only exception is when you use PPTP to create a VPN connection between computers that are physically connected to the same LAN. In such a case, the PPTP is already connected to the network, so it needs only a dial-up to connect to the PPTP server on the same LAN.
There are two types of PPTP encapsulated packets — one that handles control information and the other that handles data.
Packets that transport control information use TCP connection. On the other hand, data is transported as a payload in a PPP packet using a modified version of GRE protocol. Also, the payload can be in the form of IP, IPX datagram, AppleTalk, or a NETBEUI frame.
PPTP packets are stored based on the location of the PPTP client.
A PPTP packet from a remote PPTP client is moved to the physical media of a telecom device whereas a packet from a LAN PPTP client is stored on the network adapter’s physical media.
PPTP is mostly used for enabling VPN remote access over the Internet. To create VPN tunnels using PPTP, launch a PPTP client that connects to your Internet Service provider. In turn, PPTP will create a TCP connection between the VPN client and server to establish the tunnel connection.
The following messages are used to create and maintain a tunnel:
PPTP uses the “shared-secret” encryption process of RAS. Both ends of the connection use the same encryption key, which in this case, is the user password. This password is hashed and stored on both the PPTP client and server. RSA RC4 standard is used to create this 40-bit session key that’s based on the password.
PPTP VPN clients are built into Windows operating systems, so all versions can access it. PPTP is also available on Mac OS, Linux, and other operating systems through PPTP clients.
Yes, PPTP supports VPN connectivity over the local network, too. Once you create the tunnel and establish a VPN connection, PPTP enables data packets and control messages to flow through it.
Yes. Microsoft’s Remote Access Server (RAS) supports PPTP through dial-up and dedicated connections.
To set up Windows NT as a PPTP server,
To create a new VPN connection using PPTP:
This should create a new VPN connection for you.
PPTP should work on most modern routers. Older routers do not allow protocol traffic to pass through VPN connections, so they’re not compatible with PPTP.
If you’re unsure, check your router’s documentation. It should have the PPTP port 1723 open and should also support the forwarding of GRE Protocol type 47.
You can use PPTP with most firewalls. All that you have to do is route the traffic meant for port 1723 to the firewall.
In fact, firewalls enhance the overall security by regulating the data that comes from the Internet to the private network.
Yes, two computers can establish a tunnel over the Internet, provided they are running the same network protocol.
This is an important requirement, because PPTP supports many protocols such as IP, IPX and NETBEUI.
To troubleshoot PPTP over a TCP/IP connection, check the following:
For those worried about PPTP security, there are alternatives to PPTP.
Out of this list, L2TP/IPSec is the closest alternative for PPTP, followed by OpenVPN.
However, none of these protocols is as easy as PPTP to setup. Also, none of these come preinstalled in any operating system.
There are three key differences between PPTP and L2TP/IPSec. First, encryption process in PPTP begins after the PPP process is completed. This means the PPP authentication is used for this protocol. In L2TP/IPSec, encryption begins before the PPP process begins.
Second, PPTP uses a stream cipher called Microsoft Point to Point Encryption (MPPE) that uses 40, 56, or 128-bit encryption keys. This stream cipher encrypts data as a bit stream. L2TP/IPSec, on the other hand, uses Data Encryption Standard (DES), a block cipher that encrypts data in discrete blocks.
Lastly, PPTP requires only user-level authentication whereas L2TP/IPSec requires both user-level and system-level authentication.
In general, L2TP/IPSec is considered to be more secure than PPTP, and this is why some organizations have started using this protocol to implement remote connectivity. In L2TP/IPSec, every packet is checked for data integrity, data authentication, data confidentiality, and replay protection. Effectively, what this means is that every packet is checked to ensure that data was sent by an authorized user, it was not modified in transit, none of the packets are captured without encryption, and a stream of captured packets is not re-sent.
PPTP, on the hand, provides only data confidentiality.
Also, the fact that L2TP/IPSec uses two levels of authentication makes it more secure than PPTP.
There are two situations when PPTP scores over L2TP/IPSec:
Lastly, PPTP is supported by all Windows platforms, including Windows XP, Windows 2000, Windows NT 4.0, and even older ones like Windows 95, and Windows 98. L2TP/IPSec, on the other hand, is supported only by Windows XP and Windows 2000 VPN clients.
Pptp Related Tutorials
|Network Security Tutorial||Internet Protocol version 6 (IPv6) Tutorial|
|Internet Protocol version 4 (IPv4) Tutorial|
Pptp Related Interview Questions
|Network Security Interview Questions||Computer Network Security Interview Questions|
|Firewall Support Interview Questions||Cisco Interview Questions|
|Internet Protocol version 6 (IPv6) Interview Questions||Internet Protocol version 4 (IPv4) Interview Questions|
|Firewall (computing) Interview Questions||Cisco Network Engineer Interview Questions|
|Cisco Asa Firewall Interview Questions||Network Troubleshooting Interview Questions|
|TCP/IP Interview Questions|
Pptp Related Practice Tests
|Network Security Practice Tests||Computer Network Security Practice Tests|
|Firewall Support Practice Tests||Internet Protocol version 6 (IPv6) Practice Tests|
|Internet Protocol version 4 (IPv4) Practice Tests||Wireless Application Protocol (WAP) Practice Tests|
|Firewall (computing) Practice Tests|
The Osi Model
Wired And Wireless Networks
Wan And Remote Access Technologies
Network Access And Security
Fault Tolerance And Disaster Recovery
All rights reserved © 2020 Wisdom IT Services India Pvt. Ltd
Wisdomjobs.com is one of the best job search sites in India.