Configuring Your System - LoadRunner

To run Vusers or monitor servers over the firewall, configure your system according to the HTTPS or secured TCP/IP configuration. Note that these configurations contain a firewall on each LAN. There may also be configurations where there is a firewall only for LAN1.

TCP Configuration

The TCP configuration requires every LoadRunner agent machine behind the firewall to be allowed to open a port in the firewall for outgoing communication.

TCP Configuration

HTTPS Configuration

In the HTTPS configuration, only one machine (the proxy server) is allowed to open a port in the firewall. Therefore it is necessary to route all outgoing communications through the proxy server.

HTTPS Configuration

Note: You can connect the Controller to load generators over a firewall without using the MI Listener and LoadRunner agent. To do so, open port 54345 on a firewall in the load generator’s LAN and in the Controller’s LAN to allow incoming and outgoing data.


All rights reserved © 2018 Wisdom IT Services India Pvt. Ltd DMCA.com Protection Status

LoadRunner Topics